datasheet datasheet sfp+ multi-rate dual transponder EM316DMR10G-3R overview the fiber driver? 10-gigabit multi-rate dual transponder (em316dmr10g) from mrv extends deployment options and streamlines inventory management. it combines software- selectable data rates, connectivity mapping between any ports, and advanced small form-factor pluggable (sfp+) optical transceivers supporting the latest high-speed protocols. the wide range of optical infrastructure solutions includes media- conversion, signal repeating, lambda conversion, wave division multiplexing (wdm), and optical add/drop multiplexing (oadm). the em316dmr10g supports redundancy for self- healing links in mission-critical applications. it also provides physical layer multicasting and broadcasting over any supported protocol. installing the EM316DMR10G-3R in any powered fiber driver chassis is quick and easy. insert the module into the chassis, then insert the selected port transceivers and set the ports to the application data rate. to change the connection type later, simply replace the sfp+ transceiver and change the data rate. sfp+ transceivers can be reused easily at diferent locations or for other applications. reuse maximizes the investment in optical equipment, and it reduces the need for on-hand inventory. the em316dmr10g module performs full 3r signal regeneration (retransmission, reshaping, and retiming) on each channel at any selected data rate and protocol. the module is confgurable through the fiber driver management interfaces: snmp, telnet, ssh, or the local serial port. most data rates may also be set by jumpers located on the module itself for unmanaged operation. 1 benefts flexible and scalable - - add or change optics to adjust data or media rates - - maintain single item inventory wide range of optical and copper interfaces - - standard wavelengths (850 nm, 1310 nm, 1550 nm) - - cwdm wavelengths - - dwdm (itu-t g.694.1-2002) gigabit through 10g ethernet, fibre channel, and wan highlights wide range of applications - - media conversion - - signal repeating - - lambda conversion - - wdm - - oadm - - self-healing redundant links - - physical layer multicasting any-port-to-any-port connectivity single-port-to-multi-port connectivity 3r signal regeneration - - retransmission - - reshaping - - retiming wide data rate support - - gigabit ethernet - - 1/2/4/8 gbps fibre channel - - any 10g protocol (up to 11.3 gbps) - 10g ethernet lan or wan phy - 10g fibre channel - 10g sonet/sdh - g.709 fec rates up to 11.3 gbps pseudo random bit sequence (prbs) sender/ checker for connection testing sfp+ transceivers for fexible confguration high port density - four data ports per slot snmp management through megavision pro? and a fiber driver network management module sfp+ digital diagnostics compatible with all fiber driver chassis
datasheet datasheet creates a single data path through the module with both upstream and downstream standby link protection for mission-critical installations. in the event of link loss in either direction, the connected module pair automatically switches from the primary to the secondary data path to re-establish the link. the switchover occurs in microseconds, without the latency and data loss common with higher-level solutions like ospf or spanning tree. the module also supports multicast and broadcast for single-direction transmissions like video. for example, the multicast confguration retransmits the data signal entering port p1 out from all ports, p1, p2, p3, and p4 simultaneously. the em316dmr10g module is hot-swappable and occupies a single-slot in any powered fiber driver chassis. it is manageable with a common line interface or snmp through a fiber driver network manager installed in the same chassis. megavision pro?, the mrv network management system, uses snmp to provide full graphical administration for all fiber driver and other addressable systems in the network. the EM316DMR10G-3R supports the sff-8472 standard including digital diagnostics. together with the network manager, it provides real-time access to information such as transceiver details, transceiver temperature, tx/rx optical power, and transceiver supply voltage. the em316dmr10g application varies with the type of pluggable sfp+ transceivers installed. it can function as a media converter to connect network segments of diferent media types, or as a lambda converter to connect network elements operating at diferent wavelengths. for example, a multi-mode link operating at 850 nm can connect to a single-mode link operating at 1550 nm or a dwdm wavelength by using the required transceivers. the em316dmr10g also works with long-haul optics to repeat and extend an optical link over hundreds of kilometers. connect the em316dmr10g with a mux/demux (like the fiber driver cwdm and dwdm passive modules) to build elaborate wdm solutions with the fexibility of pluggable optics. the em316dmr10g can create a static trunk wdm system, a trunk-switching wdm system, a wdm repeater with or without lambda conversion, or a sophisticated add/drop topology. the em316dmr10g factory default confguration uses ports p1 & p2 and ports p3 & p4 for two independent data paths. each path creates a separate repeater or converter between the ports in each path. this operating mode also allows complete fexibility to remap the data paths for any custom data fow within the module. by resetting the EM316DMR10G-3R dip switches to redundant operating mode, the four ports form two redundant pairs: p1/p2 & p3/p4. this confguration 2 figure 1: dual converter/repeater/transponder switch/ router sonet mspp oc-192 10ge server sonet mspp oc-192 10ge EM316DMR10G-3R wdm 2 access 2 wdm 1 access 1 fiber driver 16-slot chassis fiber driver 16-slot chassis
datasheet datasheet mrv-fd-dmr10g-102912 copyright ?2012 mrv communications, inc. all rights reserved. 3020163-001 rev. a2 mrv has more than 50 ofces throughout the world. addresses, phone numbers and fax numbers are listed at www.mrv.com. please e-mail us at info@mrv.com or call us for assistance. mrv los angeles mrv boston mrv international 20415 nordhof street 300 apollo drive business park moerfelden chatsworth, ca 91311 chelmsford, ma 01824 waldeckerstrasse 13 800-338-5316 800-338-5316 64546 moerfelden-walldorf 818-773-0900 978-674-6800 germany tel. (49) 6105/2070 fax (49) 6105/207-100 all statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. please contact mrv communications for more information. mrv communications and the mrv communications logo are trademarks of mrv communications, inc. other trademarks are the property of their respective holders. physical specifcations operating temperature 0c to 60c (32f to 140f) storage temperature -40c to 70c (-40f to 158f) relative humidity 85% maximum, non-condensing physical dimensions 25 mm x 75 mm x 175 mm deep (3 x 3 x 7 deep) weight approximately 213 g (7.5 oz) regulatory compliance fcc part 15, class a; ic, class a; emc directive: emission (class a) and immunity; weee directive: wheelie bin mark; rohs 2 directive; china rohs model function protocols connectors wavelength (nm) range (km) EM316DMR10G-3R dual multi-rate fiber module, 1/2/4/8g fibre channel and any 10g rates 9.9-11.3 gbps, four sfp+ interfaces with 3r gigabit ethernet 1/2/4/8 gbps fibre channel any 10g rates 9.9-11.3 gbps sfp+ (x4) sfp+ dependent sfp+ dependent ordering info fibre channel switch EM316DMR10G-3R storage main optical line redundant optical line main access redundant access 10gfc 10gfc main optical line redundant optical line fiber driver 16-slot chassis fiber driver 16-slot chassis figure 2: redundant converter/repeater/transponder contact your mrv communication representative for additional information about the full line of mrv communications products or for pricing and availability.
|
